http://musicstorelive.com/catalogsearch/result/?cat=0&q=warwick+head
(855) 790-8490 - info@musicstorelive.com
https://www.facebook.com/MusicStoreLive
Introducing the WA 300 and WA 600 Bass Heads. These workhorses includes 10 band graphic equalizers, bass and treble controls, adjustable compressors and passive and active inputs for all your tonal needs.
Distortion occurs when an amplifier works beyond its range, when the power supply cannot supply the power any more to take the amp higher. A common method to control distortion in amps is to use a limiter, a device that stops the signal going beyond a specific level. Audio limiters work by setting a threshold signal level where the circuit kicks in and keeps signal levels within the capabilities of the power supply. This method is not very precise and often causes audible effects such as pumping and thumps. We designed a circuit that instead reads the distortion level in the power amp and starts limiting as soon as the amp shows even miniscule amounts of distortion. This means our amps always stay within 0.3% distortion (THD) when most amps are rated at between 5-10% distortion (that means that to get your 600 Watts out of a 600 Watt amp you will get it audibly distorted and if you want a clean signal the power will be a lot less). There are desirable types of distortion, but these are not usually associated with transistor amplifiers, but more commonly associated with tube amps and effect pedals. Warwick's goal is to give the user a great, clean sound allowing the user to decide how much, and what kind of distortion to employ.
Bass Head
300 Watt @ 4 Ohm
Housing for rack mounting
Class A Low Noise Preamp
2 Way EQ with controls for bass and treble
10 Way graphic Equalizer, switchable Mute Switch
Adjustable, switchable compressor 2 Inputs for active or passive Basses
The two instrument inputs are suitable for 2 instruments at the same time
Line Output with Ground Lift switch
Balanced DI output with switch Pre / Post EQ
FX Loop Tuner Output
Aux Stereo-Input, Mini jack for connecting MP3 player, CD player etc.
Integrated headphone amplifier. Aux in stereo signals over headphones in stereo
2 coaxial, lockable connectors for Speaker Systems
Temperature-dependent fan
Dimensions in mm: (B/H/D) 483 x 90 x 220