In Episode 1 we covered:
- Customizing the peghead
- Sanding and prepping the body for finish
- Applying the grain filler
In Episode 2
- We concentrated on applying the finish.
In Episode 3:
- installed all the hardware
- wired up the electronics
- and completed the assembly
And today we're going to put the finishing touches on the project by giving the guitar a professional setup so it plays great.
About this series:
If you ever wanted to build your own guitar, but didn't know where to start, this live build along series is a great place to start. In this 4-part series we'll show you step-by-step how to build, wire, and set up one of our fantastic mini guitar kits.
Even if you are a complete beginner, don't worry... we've made this easy -- no workshop is required. You can literally build this on your kitchen table with tools you probably already have.
Masking tape https://www.stewmac.com/item/0678
- - - - - - - - - - - -
StewMac has everything you need to build, modify, or repair guitars.
Everything is backed by our 100% Lifetime Promise. And we have FAST worldwide shipping.