We hope you love using your Bloomery as much as we loved designing this beauty. Below are the text Instructions just in case you need them:
To Adjust Tension:
Step 1: Push Bloomery into “heel down” position
Step 2: Loosen small set screws which will allow you to adjust the side tension screws.
Step 3: Tighten or loosen side tension screws until desired resistance is achieved.
Step 4: Tighten small set screws to lock the tension in place.
Step 5: Check resistance.
Cleaning slide pot:
Step 1: Spray moderate amount of WD40 with straw into small slot protecting the slide pot.
Step 2: Move pedal back and forth from “heel down to heel up” position 5-10 times.
Step 3: Repeat these steps 3 times.
Step 4: Wipe any extra WD40 off of pedal with paper towel.
Step 5: Check audio through pedal to see if scratchiness is gone.
Repeat if necessary. If scratchiness continues, or if you have any questions, email: firstname.lastname@example.org